AUTOMATIC DOORS & GATES (NZ) LIMITED

Importers - Distributors - Consultants - Installers of ..
Automatic Sliding Gate Operators Automatic Garage Door Operators Cantilever Gate Systems Automatic Barrier Systems Card Reader Systems Inductive Ground Loops Intercom Systems			Automatic Swing Gate Operators Automatic Sliding Door Operators Solar Panels and Controllers Remote Control Equipment Automatic Road Barriers Codeable Key Pads Access Equipment

SPECIFICATIONS:
Code:	CGS-347
Height:	104 mm
Length:	141 mm
Weight:	3.4 KG
Width:	100 mm
DESCRIPTION: CHANNEL END WHEEL - CGS-347 (dimensions above for CGS-347-P) The outer wheel is made of steel with a bearing blocked inside a U shaped support welded to a steel plate, which has two rubber stoppers. The outer wheel can be installed at the beginning and end of the channel and serves as a buffer inside the end cup when the gate is opened or closed. The two rubber stoppers fixed by screws in the plate allow for cushioning the force of the gate at the point of closure inside the end cup. Lastly, the two screws and the small plate positioned on the lower part, serve to fix the outer wheel on the channel. CGS-347-P (Large end wheel) CGS-347-G (Extra large end wheel)

Comunello End Wheel